Structured cabling is not the last thing we think about in a fit-out — it is planned from day one. RC Workspace designs and installs Cat6/Cat6A structured cabling as an integrated part of every office and warehouse fit-out project. Conduit routes are planned before the false ceiling goes up, cable trays are coordinated with HVAC and electrical runs, and every point is Fluke DSX certified at handover.
Free Pre-Lease Infrastructure Audit WhatsApp NowThis is a fit-out capability, not a standalone service. RC Workspace delivers this as part of complete office fit-out and warehouse fit-out projects. Every RC Workspace project includes MEP, HVAC, cabling, CCTV, and fire safety under a single coordinated contract — eliminating the coordination failures that cause delays and rework.
Cabling installed as an afterthought — after the false ceiling is in place — leads to surface-mounted trunking, inadequate cable management, and a network infrastructure that fails within 3 years. We plan cabling with the same rigour as electrical and HVAC because recabling a finished office costs 3x what it costs to do it right the first time.
What we deliver under this capability as part of an office or warehouse fit-out contract:
Point schedule, cable routing plan, patch panel layout, rack design — all coordinated with office floor plan before mobilisation.
Horizontal cabling from patch panel to each outlet. Cat6A for GCCs and tech offices. All cables pulled before false ceiling boarding.
24-port and 48-port patch panels, keystone jacks, cable management — all same brand for certified performance.
Every point tested and certified using Fluke DSX-8000. Channel test reports provided at handover.
19-inch rack installation, PDU, structured cable management, fibre patch panels for backbone connectivity.
Access point positions designed for coverage — we install conduit and cabling to AP positions as part of the fit-out, for your IT team to mount APs.
Cat6 to office pod, Wi-Fi backbone for handheld scanners, fibre backbone for large warehouses over 50,000 sq ft.
See how this was delivered as part of a complete fit-out project.
View case study →See how this was delivered as part of a complete fit-out project.
View case study →See all projects: Case Studies →
Our primary work is office and warehouse fit-out — structured cabling is delivered as part of that contract. We occasionally take standalone cabling projects for offices that need an upgrade without full fit-out, evaluated case by case.
Cat6A for GCC offices, tech companies, and any office where 10G switching is planned in the next 5 years. Cat6 for standard SME offices. See our full comparison guide at /blog/cat6-vs-cat6a-office-cabling-bengaluru/
Plan for 2 data points per workstation (200 points for 100 seats) plus dedicated points for printers, IP phones, Wi-Fi APs, and CCTV cameras. A 100-seat office typically needs 250–300 points total.
Yes. Every cabling installation includes Fluke DSX channel test reports for every point, cable schedule documentation, and patch panel labelling. This is handed over as part of your as-built documentation.
RC Workspace delivers a complete fit-out — including this capability — under a single contract. Free site assessment and BOQ within 48 hours.
Book Free Pre-Lease Infrastructure Audit